New Q820M QuikTrak™ Stand-On Mower

Specifications

Engine Manufacturer/model	FX730V
Engine power	Gross at 3,600 rpm: 23.5 hp 17.5 kW
Fuel tank capacity	12 U.S. gal. 45.3 L
Mower deck size	48-in. (122-cm) 7Iron™ PRO side-discharge 54-in. (137-cm) 7Iron™ PRO side-discharge 60-in. (152-cm) 7Iron™ PRO side-discharge
Blade tip speed	Approximately 18,000 fpm 5486 m/min
Transmission	Tuff Torq TZT13 IHT
Speed range	0-10 mph 0-16.1 km/h
Drive wheels	22x10-12 pneumatic (48 in.) 22x12-12 pneumatic (54 in., 60 in.) 22x11N12 Tweel
Caster wheels	13x5-6
Warranty	36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation.

Manufacturer/Model	FX730V
Power	Gross at 3,600 rpm: 23.5 hp 17.5 kW
Displacement	44.3 cu in. 726 cc
Injection
Cylinders	Two, V-twin
Crankcase capacity	With filter, 2.2 qt 2.1 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Forced air, with integrated clean out ports
Air cleaner	Heavy-duty canister type with safety element

Fuel type	Gasoline
Fuel consumption
Fuel tank capacity	12 U.S. gal. 45.3 L
Fuel tank switch/shut-off valve	No

Charge system	At 3,600 rpm 20A
Battery voltage	12 V
Cold cranking amp	300 CCA
Hour meter	Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics
Operator presence starting system	Yes

Transmission	Tuff Torq TZT13 IHT
Hydraulic pumps	0.79 cu in. 13 cc
Wheel motors	13 cu in. 213 cc
Travel speed	Speed range 0-10 mph 0-16.1 km/h Forward Infinite, 0-10 mph Infinite, 0-16.1 km/h Reverse Infinite, 0-5 mph Infinite, 0-8.0 km/h
Speed and direction control	Twin hand-controlled levers
Hydraulic capacity	6.0 U.S qt 5.7 L
Hydraulic oil cooler	Two 8.5 in. (22 cm) fans
Filter	Two internal and replaceable

Warranty	36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation.

Drive wheels	22x10-12 pneumatic (48 in.) 22x12-12 pneumatic (54 in., 60 in.) 22x11N12 Tweel
Rear tires
Load rating	4 PR

Dynamic braking	Dual hand-controlled levers
Park brake	Internal wet disk
Park brake actuation	Hand lever

Type	Electro-magnetic with brake, 125 lb-ft 169 Nm (48 in.) Electro-magnetic with brake, 200 lb-ft 271 Nm (54 in., 60in.)
Drive	V-belt

Size	48-in. (122-cm) 7Iron™ PRO side-discharge 54-in. (137-cm) 7Iron™ PRO side-discharge 60-in. (152-cm) 7Iron™ PRO side-discharge
Deck construction	7-Iron™ PRO: one-piece forged steel
Deck thickness	7 gauge 0.180 in. 4.6 mm
Discharge	Side
Height-of-cut range	Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm
Cutting width	48-in. (122-cm) 7Iron™ PRO side-discharge 54-in. (137-cm) 7Iron™ PRO side-discharge 60-in. (152-cm) 7Iron™ PRO side-discharge

Length
Thickness	0.25 in. 0.64 cm
Blade tip speed	Approximately 18,000 fpm 5486 m/min
Number	Three

Caster wheel type	Flat free
Caster wheels	13x5-6
Front anti-scalp rollers	RH, center, LH
Rear anti-scalp rollers

Length	Foot platform up, 67.25 in. 171 cm Foot platform down, 72 in. 183 cm
Width	With chute down, 62, 68, 74 in. 157, 173, 188 cm
Height	48 in. 122 cm
Weight	1045 lb 474 (48 in.) 1070 lb 485 kg (54 in.) 1095 lb 497 kg (60 in.)

Rollover protective structure (ROPS)
Slope operating limit

Date collected	28-Aug-2023